SpliceCom Select Voice

Minimum Version Required:

2.5.25 - 3.1.0.18311 for Yealink support.

Installation Notes:

To perform an installation you will need the IP address of the PBX and the system username and password. You will also need to ensure that each extension's "partner code" is set as the extension number (not required for Yealink handsets)

Directory Download:

Extensions

Advisories:

The SV1000 supports an "off hook working" mode.
This mode should be used at the user's discretion.
Deflect, Conference and call park are not supported.
Call ID is not retained on transfer calls.
DDI is not sent to the client, Extension or group number is presented.
Yealink handsets supported in PBX builds SV1.2.57 > no partner code needed.

PCS60 and Softphone is supported, the softphone acts like a normal PCS handset.

Hold - Unhold issue with PCS5XX handsets using firmware 1.3(101) fixed in 1.3.(118)

5000 maximum devices this includes, extensions, call groups, Departments.

Type:

Proprietary / LDAP

Requirements:

System username and password
Partner Code - for Splicecom handsets only.

Firewall Requirements:

TCP: 389 (LDAP)
TCP: 4000

Architecture:

This system is a migration for the Splicecom Maximiser. Options are soft, hard or virtual, in the cloud, on premise or a hybrid of the two.

Driver Requirements:

None

Firmware Requirements (for new installations):

SV1.2.57 last tested