SpliceCom Maximiser
Connection Information
Type:
Proprietary / LDAP
Requirements:
System username and password
Partner Code
Firewall Requirements:
TCP: 389 (LDAP)
TCP: 4000 plus various other site specific ports
PBX Information
Architecture:
This PBX will be replaced by the SelectVoice SV1000 and will be end of life March 2020.
The SpliceCom Maximiser connects onto the LAN via the RJ45 socket on the front of the PBX. The local IP address and other network settings are set through the HTML-based programming interface.
Driver Requirements:
None
Firmware Requirements (for new installations):
SV1.2.57 last tested