Go Connect Server Information

Minimum Version Required:

2.4.0

Installation Notes:

To perform an installation you will need the IP address of the PBX.

Directory Download:

Extensions, Trunks

Advisories:

Only one application can connect to the TAPI interface at a time. If another computer is connected, then the connection will fail.
This PBX is end of support from NEC March 2019.

NEC TAPI mode connection - DND not supported.
NEC TAPI mode connection - Call Forward not supported.

Connection Information

Type:

Tapi

Requirements:

3rd Party TAPI license (BE111780 - 3rd Party CTI [0112])

Firewall Requirements:

TCP: 8181 (default)

PBX Information

Architecture:

This PBX has been replaced by the SL2100. The NEC SL1100 connects directly onto the LAN through the connector on the CPU card. The local IP address and other network settings are set through either the Administration program or the HTML-based programming interface. A reboot of the PBX is required to implement a change to the LAN configuration.

Driver Requirements:

Included

Other Requirements:

A 60 day trial TAPI license may be available

WAN Connectivity
Directory Support
Trunk Monitoring
Analog Phones
Agent Features
Call Tracking Support
CLI Retention Support
Type Make Call Hang up Answer Deflect Blind Transfer Supervised Transfer Hold Pick up Send DTMF Call Fwd Dialback
NEC Handset