Minimum Version Required:
To perform an installation you will need the IP address of the PBX.
Only one application can connect to the TAPI interface at a time. If another computer is connected, then the connection will fail.
TCP: 8181 (default)
The NEC Aspire connects directly onto the LAN through the connector on the CPU card. The local IP address and other network settings are set through either the Administration program or the HTML-based programming interface. A reboot of the PBX is required to implement a change to the LAN configuration.
Firmware Requirements (for new installations):
IP1E-NTCPU or later
|WAN Connectivity||Trunk Monitoring||Analog Phones Supported||Agent Features Supported|