Go Connect Server Information

Minimum Version Required:

2.4.0

Installation Notes:

To perform an installation you will need to know the IP address and port number of the PBX or CT Gateway server. You will also need to know the system OAI password.

Directory Download:

Extensions, Agents, Trunks

Advisories:

This PBX is end of life from the manufacture

Connection Information

Type:

Proprietary (OAI)

Requirements:

Network card (or Transceiver) and sufficient PAL points for OAI Monitor and Call Control

Firewall Requirements:

TCP: 4000 or 4001

PBX Information

Architecture:

The Mitel Axxess and 5000 connect to the LAN via the network interface. Go Connect Server uses OAI protocol to communicate over a TCP connection, either directly to the PBX or through Mitel's CT Gateway application.

Driver Requirements:

None

Firmware Requirements (for new installations):

Axxess version 11
5000 version 3.1

WAN Connectivity
Directory Support
Trunk Monitoring
Analog Phones
Agent Features
Call Tracking Support
CLI Retention Support
Type Make Call Hang up Answer Deflect Blind Transfer Supervised Transfer Hold Pick up Send DTMF Call Fwd Dialback