BT Versatility | PBXs and Telephone Systems | Developer Solutions

Go Connect Server Information

Directory Download:

Extensions

Advisories:

Firmware version v902 is required.
Only Digital and IP handsets can be controlled.
Deflect, blind transfer, conferencing, internal hold and pickup are not available.
Analog handsets are not supported.
The initial state of extensions at startup is unknown.
Calls to numbers in the system speed dial list causes the number to not be shown.

Connection Information

Type:

Proprietary

Requirements:

Broadband Plus module (hardware) and Click-To-Dial licenses for all required users. Note: only certain handsets are supported.

Firewall Requirements:

TCP: 4000

PBX Information

Architecture:

The Mitel 3000 / BT Versatility is connected to the LAN and configured using a serial cable directly connected to the PBX motherboard.
A Broadband module is needed to allow IP connectivity. Once this is installed it can be accessed over the LAN via a web browser to be configured.

Driver Requirements:

None

Firmware Requirements (for new installations):

902 or later