Minimum Version Required:
2.5.32
Installation Notes:
To perform an installation you will need the IP address of the PBX.
You will also need to enter the user name and password.
If possible, all users on the telephone system should have the same password.
Directory Download:
Extensions
Advisories:
Users must not have the "Require Password Change" flag set. If they have this flag set, they cannot be monitored.
Type:
HTTP / TAPI
Firewall Requirements:
HTTP: 80
HTTP: 8080
Architecture:
The Allworx PBX connects to the LAN via the RJ45 socket on the PBX motherboard. It is managed through an HTTP interface.
Driver Requirements:
Included
Firmware Requirements (for new installations):
v7
| Type | Make Call | Hang up | Answer | Deflect | Blind Transfer | Supervised Transfer | Hold | Pick up | Send DTMF | Call Fwd | Dialback |
|---|