Panasonic KX-NCP

Connection:	CSTA
Driver required:	Included
Firewall ports required:	TCP: 33333 and 33334
Firmware version required: (for new installations)	KX-TDA: 5.0022 (IP-Gateway: 1.401) KX-TDE 100-200: 3.0007 KX-TDE 600: 3.0012 KX-NCP: 2.0501
Other requirements:	On the KX-TDA an IP-Gateway card or CTI Link card (depending on model) is required
Directory download:	Extensions

Architecture

The Panasonic connects to the LAN via the RJ45 socket on the main unit. The local IP address and other network settings are set through the programming software.

Go Connect Server Installation Notes

To perform an installation you will need the IP address of the PBX.

Advisories

Only one CTI application be connected directly at a time to the Panasonic. To connect more than one CTI application the Panasonic Multiplexer (MUX) is required. This is licensed separately. Go Connect Server detects "connected" handsets to prevent downloading too many devices. If unconnected devices are required they can be added manually.