Mitel CS5000 (interTel)

Connection:	Sufficient OAI resources for Monitor and Call Control
Driver required:	None
Firewall ports required:	TCP: 4000 or 4001
Firmware version required: (for new installations)	Axxess version 11 5000 version 3.1
Other requirements:	OAI license for System OAI Events and 3rd Party Call Control
Directory download:	Extensions, agents, and trunks

Architecture

The Mitel Axxess and 5000 connect to the LAN via the network interface. Go Connect Server uses OAI protocol to communicate over a TCP connection, either directly to the PBX or through Mitel's CT Gateway application.

Go Connect Server Installation Notes

To perform an installation you will need to know the IP address and port number of the PBX or CT Gateway server. You will also need to know the system OAI password.

Advisories

(None)